Stirrer Accessories
Wilmad Labglass STIR SHAFT SSTEEL 100-5000ML
Stirrer Shaft, Button Style, Polished, Stainless Steel. Shaft O.D.: 10mm, Overall Length: 515mm; Fits Flask Capacity: 100-5000mL. Precision ground and polished with side button for attachment of Stirrer blades.
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 50mm Dia, Fits Shaft Size 10mm, 45° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 50mm Dia, Fits Shaft Size 10mm, 45¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Chemglass Life Sciences Stirring Shaft, 10mm, Polished, 480mm OAL
Stirring Shaft, 10mm, Polished, 480mm OAL. A 10mm precision ground and polished stirrer shaft for use with PTFE bearings and CG-2091 and CG-2092 PTFE agitators. Flat ground section extends half way up shaft and permits positive seating of the PTFE locking screws.
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 45° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 45¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Metrohm USA PROPELLER STIR SHAFT
Propeller stirrer, length from lower edge of SGJ: 104 mm. For use with beakers with 722, 802 Rod Stirrer
Chemglass Life Sciences 10mm Stirring Shaft, Chem-Stir, Polished, For Use With 100mL-5L Flasks, 460mm OAL, Complete with PTFE Nut and Bolt
10mm Stirring Shaft, Chem-Stir, Polished, For Use With 100mL-5L Flasks, 460mm OAL, Complete with PTFE Nut and Bolt. A 10mm OD precision ground and polished stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2077. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2074 ground shaft. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2074.
Chemglass Life Sciences Replacement Bearing Sleeve, 10mm
Replacement Bearing Sleeve, 10mm. Replacement part for CG2077G series of stirrer bearings.
Ace Glass, Inc. Bearing, pressure, glass, 10mm, #15, complete
Bearing, pressure, glass, 10mm, #15, complete
Chemglass Life Sciences Stirrer Blade, PTFE, 10mm, for 250mL to 500mL Flasks, 19mm Width x 56mm Length, 24/40 minimum joint clearance
Stirrer Blade, PTFE, 10mm, for 250mL to 500mL Flasks, 19mm Width x 60mm Length, 24/40 minimum joint clearance. Stirrer blade made of 1/8" thick solid PTFE for use with both Chem-Stir and button style stirring shafts having a 10mm OD.
Chemglass Life Sciences Stirrer Bearing, PTFE, Complete, fits 10mm Shaft, 24/40 Inner Joint
Stirrer Bearing, PTFE, Complete, fits 10mm Shaft, 24/40 Inner Joint. Grease-Free PTFE stirrer bearing designed for use in moderate vacuum applications. Bearing consists of a threaded glass adapter having the listed inner joint, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing. The saddle o-ring provides only glass and PTFE contact with the reaction, while allowing for the vacuum tight seal. Design of the bearing permits replacement of the saddle o-ring at a fraction of the cost of the entire bearing. PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
Chemglass Life Sciences Chemglass 30 mm Hollow Stirrer Shaft for 100 L Process Reactor (CG-2097-102)
The Chemglass CG-2097-102 is a precision 30 mm hollow stirrer shaft designed for use with 100 L process reactors. The shaft is precision ground and polished, with the lower portion sandblasted and a 3/8 in flat for secure mounting. It is made from heavy-wall glass tubing and is compatible with PTFE agitators and reactor support frames.
- 30 mm outer diameter
- Hollow shaft construction
- Lower portion sandblasted with 3/8 in flat
- Designed for 100 L process reactors
- Precision ground and polished finish
- Made from heavy-wall glass tubing
- Compatible with PTFE agitators and reactor support frames
Chemglass Life Sciences 10ft Extension Cord, Type "J" (Black), Standard to Mini Plug
10ft Extension Cord, Type "J" (Black), Standard to Mini Plug. Coiled extension cords to connect thermocouples to instrumentation such as temperature monitors, controllers and data loggers. Cords are 10ft long and made of 26-gauge multistrand wire with PVC insulation. All cords have a female standard (OST) with a choice of a male standard (OST) or mini (SMP) connection.
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 50mm Dia, Fits Shaft Size 10mm, 90° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 50mm Dia, Fits Shaft Size 10mm, 90¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 90° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 90¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.